Tuesday, October 18, 2022

Gather Together - Layout

Hi there Audrey here once again with another layout showcasing Vintage Artistry Serenity. How magical was this photo shoot? They really gave me a Lord of the Rings or Chronicles of Narnia vibe. 

I used the Serenity Solids Paper 1 from Vintage Artistry Serenity - Solids 12x12 Collection Pack as my base and a frame for my main paper. I trimmed approximately 1cm of two edges off the Hidden Whispers paper from the Vintage Artistry Serenity 12x12 Collection Pack and stuck it to the Solid Paper 1 sideways so the main leaf design looks like it coming down from the top.

You've got to check out the NEW Curators Essential Key Lined Chipboard Frames,,,,,They're adhesive!!One of many of my NEW favourites at the moment. I stuck one of the largest ones to Vintage Artistry Serenity Brief Glimpse paper, then used a blade to cut it the frame away from the paper. I placed foam mount behind the frame, mainly in the centre back in case I wanted to slip extra paper or ephemera ect behind. I trimmed my main photo to fit into this frame so that a small amount of the Brief Glimpse paper could be seen each side of the photo. I used foam mount for this also.

The smaller photo is framed with the beautiful rustic frame from ARToptions Plum Grove Laser Cuts I attached a double layer of foam tape to the centre back. Then stuck both photos in place on the layout.

I've taken the ornate rectangular frame from the Vintage Artistry Serenity - Laser Cut Outs and cut it diagonally across. Tucked one side behind the small photo and the other at the bottom of the main photo. Centred the Filigree flourish is also from Plum Grove laser cuts below the smaller photo and glued that in place.

To the bottom right of the layout is a collection of wildflowers from ARToptions Plum Grove Wildflower and Curators Meadow Laser Cuts along with some little forest critters and mushrooms from the Meadow set also. I added a little curve to the animals for depth using hot glue allowed to dry then sticking down. I did the same for the beautiful laser cut leaves at the top of the page. Shaped the leaves dropped some hot glue in the curves at the back then stuck them in place. Then I tucked some of the Spectrum Sherbet - Strawberry Lemonade Acetate Leaves amongst the blue one. Cutting any over hanging leaves or branched away at the top.

To make the collection of elements to the left of the main photo I started with gluing the main three flowers and leaves from Rustic Bouquet - Bluejay in place, then tucked pieces of the circular ornate frame from the Laser Cut Outs. I cut this into about four pieces. I glued a couple of tags from Vintage Artistry Serenity - Chipboard Bits and Tag Set to the left of the photo and used the chain ladder from the Serenity Laser Cut Outs and a fence in front followed by some mushroom and foliage laser cuts. Once I was happy with this little arrangement to the left side of the photo I hot glued the fox and chipboard banner in place. To finish off I glued another ornate frame with some rub-ons behind it and a chipboard bookplate above it to the bottom right of the main photo.

 I used the following papers from this pack.⮛
 I used the following papers from this pack.⮛Serenity Solids Paper 1
Until Next Time
Happy Creating
Audrey x

Be Happy, Be You

I started off with ARToptions Alena - Dramatic paper from the ARToptions Alena - 12x12 Collection Pack as my base. I didn't want to take away from the paper too much as I loved that circle/wreath on the page. So I used that circle design and built the layout around it.

I cropped my photos to fit behind the blue frames from the ARToptions Alena - Laser Cut Outs. Added a couple of layers of foam tape behind them for depth. I chose the red frame from the same pack and stuck that in place to the bottom right of the page and tucked a tag in at the top. I added the laser cut cord to the bottom of one of the framed photos and stuck both photos in place. Tucked a ticket to the left of one photo and tab with rub-on words to the right side of the other photo.

I then proceeded to build my collection below the photos, following the curve of the design on the paper. Amongst the collection is brand NEW flowers from 49 and Market. Some being the Newest little flowers on the block - Florets, I used the Mango ones. They big sister I guess in this colour is the NEW Natures Bounty flowers, I used - Mango and Salsa. I applied these using hot glue. Amongst the flowers are lace, the cutest little buttons, charms, flowers, butterflies and leaves all from the ARToptions Alena - Laser Cut Outs. 

To finish off I added a word tab with the words 'Be Happy, Be You' which is the title for my layout and if you look really carefully you might see some philodendron leaf rub on transfers from Vintage Artistry Beached - Rub on Transfers.


49 and Market - Product Used:
Until Next Time
Happy Creating
Audrey x

Tuesday, September 20, 2022

Life is Magical - Layout

Hi there Audrey here again with another layout. Everything about creating this layout came together so well, all because of a gorgeous product. As usual 49 and Market has out done themselves and created some more beautiful products to help your creativity come together. I loved creating with the New Vintage Artistry Serenity. The tones were perfect for this photo of my granddaughter Cadence dressed as Galadriel, the Elven Queen from Lord of the Rings. She dressed as her for Book Week this year at school recently.

I started with a base of darker paper Serenity - Solids Paper 1, to frame the layout from the  Vintage Artistry Serenity - Solids 12x12 collection Pack. I then trimmed a small about from two sides of the Vintage Artistry Serenity - Quiet Moments from the Vintage Artistry Serenity - 12x12 Collection Pack. I matted my photo on the paper - Brief Glimpse from the collection pack also. I cut two more pieces from the same paper for behind the photo. I stuck these down with some tape just in the centre back as usual so the I could tuck ephemera etc behind if I wished later and as you can see I did just that. The photo is stuck down with some foam mount to add some depth. I cut a thin strip of  the Brief Glimpse paper, thin enough to thread through the eyelet lace in the Vintage Artistry Serenity - Laser Cut Elements. I scrunched this strip to distress it and make it more pliable to thread through. I then glued the lace in place with foam mount, leaving high and low points so it looked like real lace when stuck down. I then tuck the blue lace underneath this in the same way, then added little frayed bits of Lacey Trim in white, here and there amongst the eyelet laser cut lace.

The new Vintage Artistry Serenity - Washi Tape Set is so beautiful. I tucked a small amount to the left of the photo and ripped some paper to sit behind the ornate frame to the right of the photo and added washi to that. Glued it to the back of the frame and added the words 'Life is Magical' from the Serenity 6x8 Rub on Transfer Set and stuck the whole lot in place with some hot glue. Leaving some height behind for tucking extra bits like laser cut foliage, ephemera and Lacey Trim. To finish off I made a collection of lace, laser cuts and the NEW paper flowers to each side of the photo. I applied these using hot glue.



I used the following papers from this pack.⮛

Tuesday, September 6, 2022

You are Amazing - Layout

Hi Audrey here once again with a layout. I used the Spectrum Sherbet - Painted Foundations - Prism paper from the Spectrum Sherbet - 12x12 Sherbet Foundations Pack as my base paper to start. I trimmed 1.5cm from the sides of Spectrum Sherbet - Solid - Raspberry. Then ripped the top and bottom edges off and stuck this to the base page. I only applied tape to the back centre of the page so I can tuck extra pieces, ephemera, tags etc. I took the Brumbleberry paper from the Spectrum Sherbet 6x8 Strawberry Lemonade Paper Collection and ripped that diagonally across and stuck that to the top and bottom corners of the Raspberry page. I then took two pieces of the Washed paper from the same pack added mounting tape to the back centre and stuck them staggered but centred to the page.

The main photo is framed with a laser cut from ARToptions Avesta Laser Cut Elements and the smaller photo on a pink paper from the 8x6 pack. The largest frame from the Whitewash Chipboard Frames is mounted to the right of the layout and a smaller frame cut in half and tucked behind the top ‘Washed’ paper. I then tucked elements from Curators Essential - Laser Cut Elements, acetate leaves, ephemera ect in and around the layout and photos. I applied rub on transfers onto the chipboard tags and stuck them and the chipboard tags in place with mounting tape. To finish off I added some words from the Avesta Laser Cut and acetate butterflies.


49 and Market - Products Used: